[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14.4-gnuowen (sam@judas) (gcc version 4.8.2 (Debian 4.8.2-16) ) #19 SMP PREEMPT Fri May 23 08:56:34 MDT 2014
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000c0000-0x000000007f6dffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6e0000-0x000000007f7fffff] type 16
[    0.000000] BIOS-e820: [mem 0x000000007f800000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 1703WMF, BIOS 7BETC7WW (2.08 ) 05/30/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6e0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 080000000 write-back
[    0.000000]   1 base 07F800000 mask 0FF800000 uncachable
[    0.000000]   2 base 0D0000000 mask 0F0000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] found SMP MP-table at [mem 0x000f0400-0x000f040f] mapped at [c00f0400]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x36400000-0x367fffff]
[    0.000000]  [mem 0x36400000-0x367fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x30000000-0x363fffff]
[    0.000000]  [mem 0x30000000-0x363fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x36800000-0x377fdfff]
[    0.000000]  [mem 0x36800000-0x373fffff] page 2M
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] BRK [0x017cb000, 0x017cbfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36bca000-0x375dcfff]
[    0.000000] ACPI: RSDP 000f0800 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 7f6e28e0 00004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 7f6e2a10 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 7f6e2a50 000068 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG 7f6e2ac0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 7f6e5d10 0000F4 (v03 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 7f6e2b40 0030CA (v03 COREv4 COREBOOT 20090419 INTL 20140114)
[    0.000000] ACPI: FACS 7f6e2b00 000040
[    0.000000] ACPI: SSDT 7f6e5e10 0002FC (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x017cc000, 0x017ccfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0x7f6dffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
[    0.000000]   node   0: [mem 0x00100000-0x7f6dffff]
[    0.000000] On node 0 totalpages: 521855
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2302 pages used for memmap
[    0.000000]   HighMem zone: 294626 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xefffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f5db0000 s31360 r0 d21888 u53248
[    0.000000] pcpu-alloc: s31360 r0 d21888 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520079
[    0.000000] Kernel command line: BOOT_IMAGE=(ahci0,1)/boot/vmlinuz-3.14.4-gnuowen root=/dev/sda1 processor.max_cstate=2 drm.debug=0x06 console=tty0 console=ttyS0,115200n8
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f6e0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2051708K/2087420K available (4113K kernel code, 324K rwdata, 1560K rodata, 480K init, 1448K bss, 35712K reserved, 1178504K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff8e000 - 0xfffff000   ( 452 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc15de000 - 0xc1656000   ( 480 kB)
[    0.000000]       .data : 0xc14049c3 - 0xc15dd200   (1890 kB)
[    0.000000]       .text : 0xc1000000 - 0xc14049c3   (4114 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1662.434 MHz processor
[    0.001011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.86 BogoMIPS (lpj=1662434)
[    0.002006] pid_max: default: 32768 minimum: 301
[    0.002246] ACPI: Core revision 20131218
[    0.005530] ACPI: All ACPI Tables successfully acquired
[    0.006052] Security Framework initialized
[    0.006269] SELinux:  Disabled at boot.
[    0.007020] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.007334] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.008104] Initializing cgroup subsys memory
[    0.008324] Initializing cgroup subsys devices
[    0.008535] Initializing cgroup subsys freezer
[    0.008758] Initializing cgroup subsys net_cls
[    0.008982] Initializing cgroup subsys blkio
[    0.009005] Initializing cgroup subsys perf_event
[    0.009257] Disabled fast string operations
[    0.009470] CPU: Physical Processor ID: 0
[    0.009672] CPU: Processor Core ID: 0
[    0.010005] mce: CPU supports 6 MCE banks
[    0.010215] CPU0: Thermal monitoring enabled (TM2)
[    0.010451] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.010451] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[    0.010451] tlb_flushall_shift: 6
[    0.011103] Freeing SMP alternatives memory: 12K (c1656000 - c1659000)
[    0.011493] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.012421] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.022748] smpboot: CPU0: Intel(R) Core(TM) Duo CPU      L2400  @ 1.66GHz (fam: 06, model: 0e, stepping: 0c)
[    0.024000] Performance Events: Core events, core PMU driver.
[    0.024000] ... version:                1
[    0.024000] ... bit width:              40
[    0.024000] ... generic registers:      2
[    0.024000] ... value mask:             000000ffffffffff
[    0.024003] ... max period:             000000007fffffff
[    0.024254] ... fixed-purpose events:   0
[    0.024453] ... event mask:             0000000000000003
[    0.030085] CPU 1 irqstacks, hard=f50a4000 soft=f50a6000
[    0.030088] x86: Booting SMP configuration:
[    0.030296] .... node  #0, CPUs:      #1
[    0.002000] Initializing CPU#1
[    0.002000] Disabled fast string operations
[    0.042096] x86: Booted up 1 node, 2 CPUs
[    0.043005] smpboot: Total of 2 processors activated (6649.73 BogoMIPS)
[    0.045060] devtmpfs: initialized
[    0.046067] regulator-dummy: no parameters
[    0.046358] NET: Registered protocol family 16
[    0.046777] cpuidle: using governor ladder
[    0.046985] cpuidle: using governor menu
[    0.047086] ACPI: bus type PCI registered
[    0.047346] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.047805] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.048003] PCI: Using MMCONFIG for extended config space
[    0.048264] PCI: Using configuration type 1 for base access
[    0.051045] bio: create slab <bio-0> at 0
[    0.051253] ACPI: Added _OSI(Module Device)
[    0.051278] ACPI: Added _OSI(Processor Device)
[    0.051502] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.052003] ACPI: Added _OSI(Processor Aggregator Device)
[    0.056087] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.056839] ACPI: Interpreter enabled
[    0.057012] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    0.057471] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    0.057960] ACPI: (supports S0 S3 S4 S5)
[    0.058003] ACPI: Using IOAPIC for interrupt routing
[    0.058279] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.059239] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.068546] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.068861] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.069116] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.069636] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.070057] PCI host bridge to bus 0000:00
[    0.070267] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.070542] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.071005] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.071299] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.071640] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.072004] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.072331] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.072671] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.073004] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.073330] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.073672] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.074004] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.074332] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.074673] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.075004] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.075330] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.075670] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.076004] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[    0.076332] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.076684] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[    0.077117] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[    0.077133] pci 0000:00:02.0: reg 0x10: [mem 0xe4300000-0xe437ffff]
[    0.077142] pci 0000:00:02.0: reg 0x14: [io  0x50a0-0x50a7]
[    0.077151] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[    0.077160] pci 0000:00:02.0: reg 0x1c: [mem 0xe4400000-0xe443ffff]
[    0.077309] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.077322] pci 0000:00:02.1: reg 0x10: [mem 0xe4380000-0xe43fffff]
[    0.077526] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.077552] pci 0000:00:1b.0: reg 0x10: [mem 0xe4440000-0xe4443fff 64bit]
[    0.077671] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.077743] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.078083] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.078208] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.078358] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.078486] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.078630] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.078745] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.078892] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.079039] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.079197] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.079260] pci 0000:00:1d.0: reg 0x20: [io  0x5000-0x501f]
[    0.079378] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.079722] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.079780] pci 0000:00:1d.1: reg 0x20: [io  0x5020-0x503f]
[    0.079887] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.080078] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.080160] pci 0000:00:1d.2: reg 0x20: [io  0x5040-0x505f]
[    0.080281] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.080633] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.080692] pci 0000:00:1d.3: reg 0x20: [io  0x5060-0x507f]
[    0.080799] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.081084] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.081113] pci 0000:00:1d.7: reg 0x10: [mem 0xe4444000-0xe44443ff]
[    0.081231] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.081299] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.081659] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.082108] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.082227] pci 0000:00:1f.0: address space collision: [io  0x0500-0x057f] conflicts with ACPI CPU throttle [??? 0x00000510-0x00000515 flags 0x80000000]
[    0.082878] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.083007] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[    0.083369] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[    0.083745] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[    0.084152] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.084172] pci 0000:00:1f.1: reg 0x10: [io  0x50a8-0x50af]
[    0.084186] pci 0000:00:1f.1: reg 0x14: [io  0x50c8-0x50cb]
[    0.084200] pci 0000:00:1f.1: reg 0x18: [io  0x50b0-0x50b7]
[    0.084214] pci 0000:00:1f.1: reg 0x1c: [io  0x50cc-0x50cf]
[    0.084228] pci 0000:00:1f.1: reg 0x20: [io  0x5080-0x508f]
[    0.084380] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[    0.084406] pci 0000:00:1f.2: reg 0x10: [io  0x50b8-0x50bf]
[    0.084420] pci 0000:00:1f.2: reg 0x14: [io  0x50d0-0x50d3]
[    0.084434] pci 0000:00:1f.2: reg 0x18: [io  0x50c0-0x50c7]
[    0.084448] pci 0000:00:1f.2: reg 0x1c: [io  0x50d4-0x50d7]
[    0.084462] pci 0000:00:1f.2: reg 0x20: [io  0x5090-0x509f]
[    0.084476] pci 0000:00:1f.2: reg 0x24: [mem 0xe4444400-0xe44447ff]
[    0.084537] pci 0000:00:1f.2: PME# supported from D3hot
[    0.085013] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.085090] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.085362] pci 0000:01:00.0: [8086:109a] type 00 class 0x020000
[    0.085396] pci 0000:01:00.0: reg 0x10: [mem 0xe4100000-0xe411ffff]
[    0.085440] pci 0000:01:00.0: reg 0x18: [io  0x4000-0x401f]
[    0.085643] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.085752] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.086021] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.086260] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.086268] pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.086427] pci 0000:02:00.0: [8086:4227] type 00 class 0x028000
[    0.086486] pci 0000:02:00.0: reg 0x10: [mem 0xe4200000-0xe4200fff]
[    0.087186] pci 0000:02:00.0: PME# supported from D0 D3hot
[    0.087324] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.087832] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.088011] pci 0000:00:1c.1:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.088105] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.088438] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.088771] pci 0000:05:00.0: [1180:0476] type 02 class 0x060700
[    0.088794] pci 0000:05:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[    0.089004] pci 0000:05:00.0: MMC cards are now supported by standard SDHCI controller
[    0.089400] pci 0000:05:00.0: reg 0x10: [mem 0xe2000000-0xe2000fff]
[    0.089441] pci 0000:05:00.0: supports D1 D2
[    0.089445] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.089484] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.090077] pci 0000:05:00.1: [1180:0552] type 00 class 0x0c0010
[    0.090103] pci 0000:05:00.1: reg 0x10: [mem 0xe2001000-0xe20017ff]
[    0.090206] pci 0000:05:00.1: supports D1 D2
[    0.090210] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.090315] pci 0000:05:00.2: [1180:0822] type 00 class 0x080500
[    0.090341] pci 0000:05:00.2: reg 0x10: [mem 0xe2001800-0xe20018ff]
[    0.090445] pci 0000:05:00.2: supports D1 D2
[    0.090449] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.090607] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
[    0.091007] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.091015] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.091025] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.091029] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.091034] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.091038] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.091042] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    0.091046] pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    0.091050] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    0.091055] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
[    0.091059] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.091063] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.091067] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.091072] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.091076] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.091080] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.091084] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    0.091089] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    0.091093] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[    0.091097] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[    0.091101] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.091170] pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 05-06] (conflicts with (null) [bus 05-06])
[    0.091178] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
[    0.091183] pci_bus 0000:06: busn_res: can not insert [bus 06-09] under [bus 05-06] (conflicts with (null) [bus 05-06])
[    0.091190] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-06]
[    0.091682] pci_bus 0000:00: on NUMA node 0
[    0.091805] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.092326] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.092844] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.093319] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.093851] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.094317] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.095060] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.095595] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.096300] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.097073] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.097414] vgaarb: loaded
[    0.097555] vgaarb: bridge control possible 0000:00:02.0
[    0.098074] SCSI subsystem initialized
[    0.098300] libata version 3.00 loaded.
[    0.098300] PCI: Using ACPI for IRQ routing
[    0.101071] PCI: pci_cache_line_size set to 64 bytes
[    0.101171] e820: reserve RAM buffer [mem 0x7f6e0000-0x7fffffff]
[    0.101427] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.101777] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.102044] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.104027] Switched to clocksource hpet
[    0.110045] pnp: PnP ACPI init
[    0.110227] ACPI: bus type PNP registered
[    0.110559] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.110884] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.111216] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.111545] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.111868] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.112198] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.112527] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.112851] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.113179] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.113678] pnp 00:01: [dma 4]
[    0.113732] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.113788] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.113944] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.114281] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.114355] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.114454] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.114752] system 00:05: [io  0x0500-0x057f] could not be reserved
[    0.115057] system 00:05: [io  0x0480-0x04bf] has been reserved
[    0.115354] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.115412] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.115489] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.115565] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.115612] pnp: PnP ACPI: found 9 devices
[    0.115817] ACPI: bus type PNP unregistered
[    0.154718] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.154770] pci 0000:00:1f.0: BAR 13: [io  0x0500-0x057f] has bogus alignment
[    0.155118] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.155134] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    0.155521] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.155773] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.156078] pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.156418] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    0.156805] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.157052] pci 0000:00:1c.1:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.157398] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.157660] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.157918] pci 0000:05:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.157922] pci 0000:05:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.157927] pci 0000:05:00.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.157932] pci 0000:05:00.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.157946] pci 0000:05:00.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.158320] pci 0000:05:00.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[    0.158661] pci 0000:05:00.0: BAR 13: assigned [io  0x2000-0x20ff]
[    0.158959] pci 0000:05:00.0: BAR 14: assigned [io  0x2400-0x24ff]
[    0.159270] pci 0000:05:00.0: CardBus bridge to [bus 06-09]
[    0.159549] pci 0000:05:00.0:   bridge window [io  0x2000-0x20ff]
[    0.159852] pci 0000:05:00.0:   bridge window [io  0x2400-0x24ff]
[    0.160159] pci 0000:05:00.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.160521] pci 0000:05:00.0:   bridge window [mem 0x88000000-0x8bffffff]
[    0.160857] pci 0000:00:1e.0: PCI bridge to [bus 05-06]
[    0.161117] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.161425] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.161764] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.162150] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.162154] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.162158] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.162162] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.162166] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.162170] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.162174] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.162178] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.162182] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.162186] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.162190] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.162195] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.162199] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.162203] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.162207] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.162211] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.162215] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff]
[    0.162219] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.162223] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.162227] pci_bus 0000:01: resource 1 [mem 0xe4100000-0xe41fffff]
[    0.162232] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[    0.162236] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe42fffff]
[    0.162240] pci_bus 0000:05: resource 0 [io  0x2000-0x3fff]
[    0.162244] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff]
[    0.162249] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.162253] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.162257] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.162261] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.162265] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.162269] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.162273] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.162277] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff]
[    0.162281] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.162285] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.162289] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.162293] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
[    0.162297] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.162301] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.162305] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.162309] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff]
[    0.162313] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff]
[    0.162318] pci_bus 0000:05: resource 20 [mem 0x80000000-0xfebfffff]
[    0.162322] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.162326] pci_bus 0000:06: resource 0 [io  0x2000-0x20ff]
[    0.162330] pci_bus 0000:06: resource 1 [io  0x2400-0x24ff]
[    0.162334] pci_bus 0000:06: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.162338] pci_bus 0000:06: resource 3 [mem 0x88000000-0x8bffffff]
[    0.162382] NET: Registered protocol family 2
[    0.162803] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.163189] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.163574] TCP: Hash tables configured (established 8192 bind 8192)
[    0.163915] TCP: reno registered
[    0.164087] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.164399] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.164803] NET: Registered protocol family 1
[    0.165039] pci 0000:00:02.0: Boot video device
[    0.166341] PCI: CLS 64 bytes, default 64
[    0.166410] Unpacking initramfs...
[    0.516172] Freeing initrd memory: 10316K (f6bca000 - f75dd000)
[    0.517167] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.517528] audit: initializing netlink subsys (disabled)
[    0.517825] audit: type=2000 audit(1401490070.516:1): initialized
[    0.518543] bounce pool size: 64 pages
[    0.518739] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.522617] VFS: Disk quotas dquot_6.5.2
[    0.522911] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.524068] msgmni has been set to 1725
[    0.524758] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.525143] io scheduler noop registered
[    0.525341] io scheduler deadline registered
[    0.525673] io scheduler cfq registered (default)
[    0.526246] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.526551] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.526821] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.527107] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.527291] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.527637] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.527965] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.527996] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.528359] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.528687] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.528719] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.529089] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.529121] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.529470] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.529533] intel_idle: does not run on family 6 model 14
[    0.529655] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0E:00/input/input0
[    0.530213] ACPI: Sleep Button [SLPB]
[    0.530483] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0D:00/input/input1
[    0.531187] ACPI: Lid Switch [LID]
[    0.531461] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.531830] ACPI: Power Button [PWRF]
[    0.532310] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    0.532829] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    0.533390] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.534555] Linux agpgart interface v0.103
[    0.534813] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    0.535149] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    0.536256] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.536747] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.537158] [drm] Initialized drm 1.1.0 20060810
[    0.537947] [drm:i915_dump_device_info], i915 device info: gen=3, pciid=0x27a2 flags=is_mobile,is_i945gm,has_fbc,has_hotplug,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,
[    0.538018] [drm:intel_detect_pch], No PCH found.
[    0.538023] [drm] Memory usable by graphics device = 256M
[    0.538293] [drm:i915_gem_gtt_init], GMADR size = 256M
[    0.538296] [drm:i915_gem_gtt_init], GTT stolen size = 8M
[    0.538566] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
[    0.538570] [drm:intel_opregion_setup], ACPI OpRegion not supported!
[    0.538596] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.538924] [drm] Driver supports precise vblank timestamp query.
[    0.539247] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz
[    0.539253] i915 0000:00:02.0: Invalid ROM contents
[    0.539499] [drm:intel_parse_bios], VBT signature missing
[    0.539501] [drm] failed to find VBIOS tables
[    0.539727] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[    0.539737] [drm:i915_gem_init_stolen], found 8388608 bytes of stolen memory at 7f800000
[    0.539771] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[    0.540092] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[    0.540237] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[    0.540237] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[    0.540237] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[    0.540237] i915: render error detected, EIR: 0x00000010
[    0.540237] i915: page table error
[    0.540237] i915:   PGTBL_ER: 0x00000012
[    0.540237] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[    0.540237] i915: render error detected, EIR: 0x00000010
[    0.540237] i915: page table error
[    0.540237] i915:   PGTBL_ER: 0x00000012
[    0.543612] [drm:intel_modeset_init], 2 display pipes available.
[    0.543617] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    0.543621] [drm:intel_modeset_init], pipe A sprite A init failed: -19
[    0.543626] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    0.543629] [drm:intel_modeset_init], pipe B sprite B init failed: -19
[    0.543636] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.566030] [drm:intel_lvds_init], using preferred mode from EDID: 
[    0.566036] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    0.566042] [drm:intel_lvds_init], detected single-link lvds configuration
[    0.566117] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 1649105/4426545, sysfs interface registered
[    0.566237] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, ffff000]
[    0.568632] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[    0.568637] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
[    0.568767] [drm] initialized overlay support
[    0.568990] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
[    0.568999] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled
[    0.569014] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
[    0.569019] [drm:intel_modeset_readout_hw_state], [ENCODER:17:DAC-17] hw state readout: disabled, pipe A
[    0.569024] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TV-19] hw state readout: disabled, pipe A
[    0.569028] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
[    0.569033] [drm:intel_modeset_readout_hw_state], [CONNECTOR:16:VGA-1] hw state readout: disabled
[    0.569037] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:SVIDEO-1] hw state readout: disabled
[    0.569043] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[    0.569046] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    0.569049] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    0.569053] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.569057] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.569060] [drm:intel_dump_pipe_config], requested mode:
[    0.569065] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    0.569068] [drm:intel_dump_pipe_config], adjusted mode:
[    0.569072] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    0.569077] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[    0.569080] [drm:intel_dump_pipe_config], port clock: 0
[    0.569083] [drm:intel_dump_pipe_config], pipe src size: 0x0
[    0.569087] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    0.569090] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.569093] [drm:intel_dump_pipe_config], ips: 0
[    0.569096] [drm:intel_dump_pipe_config], double wide: 0
[    0.569100] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
[    0.569103] [drm:intel_dump_pipe_config], cpu_transcoder: B
[    0.569106] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    0.569110] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.569114] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.569117] [drm:intel_dump_pipe_config], requested mode:
[    0.569122] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1024 0 0 0 768 0 0 0 0x0 0x0
[    0.569125] [drm:intel_dump_pipe_config], adjusted mode:
[    0.569130] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[    0.569135] [drm:intel_dump_crtc_timings], crtc timings: 45982 1024 1048 1184 1344 768 779 1 806, type: 0x0 flags: 0xa
[    0.569138] [drm:intel_dump_pipe_config], port clock: 45982
[    0.569141] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[    0.569145] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    0.569148] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.569151] [drm:intel_dump_pipe_config], ips: 0
[    0.569154] [drm:intel_dump_pipe_config], double wide: 0
[    0.569158] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    0.569163] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    0.569167] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    0.569170] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    0.569174] [drm:check_crtc_state], [CRTC:3]
[    0.569177] [drm:check_crtc_state], [CRTC:4]
[    0.569194] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    0.569198] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[    0.569213] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    0.569219] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    0.569225] [drm:drm_mode_debug_printmodeline], Modeline 12:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    0.569230] [drm:drm_mode_debug_printmodeline], Modeline 9:"1024x768" 40 43330 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    0.569236] [drm:drm_mode_debug_printmodeline], Modeline 10:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    0.569242] [drm:drm_mode_debug_printmodeline], Modeline 11:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    0.569245] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1]
[    0.569250] [drm:intel_crt_detect], [CONNECTOR:16:VGA-1] force=1
[    0.581017] [drm:intel_crt_detect], CRT not detected via hotplug
[    0.582016] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[    0.582020] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    0.582024] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    0.582027] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[    0.582303] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    0.582306] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[    0.582310] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[    0.582314] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1] disconnected
[    0.582317] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:SVIDEO-1]
[    0.582321] [drm:intel_tv_detect], [CONNECTOR:18:SVIDEO-1] force=1
[    0.582326] [drm:intel_get_load_detect_pipe], [CONNECTOR:18:SVIDEO-1], [ENCODER:19:TV-19]
[    0.582329] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[    0.582340] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    0.582345] [drm:connected_sink_compute_bpp], [CONNECTOR:18:SVIDEO-1] checking for sink bpp constrains
[    0.582349] [drm:intel_tv_compute_config], forcing bpc to 8 for TV
[    0.582353] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[    0.582356] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[    0.582359] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    0.582362] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[    0.582366] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.582370] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.582373] [drm:intel_dump_pipe_config], requested mode:
[    0.582379] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[    0.582382] [drm:intel_dump_pipe_config], adjusted mode:
[    0.582387] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[    0.582392] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
[    0.582395] [drm:intel_dump_pipe_config], port clock: 108000
[    0.582398] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[    0.582402] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    0.582406] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.582408] [drm:intel_dump_pipe_config], ips: 0
[    0.582411] [drm:intel_dump_pipe_config], double wide: 0
[    0.589864] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 5120
[    0.589871] [drm:intel_update_fbc], no output, disabling
[    0.589878] [drm:intel_crtc_mode_set], [ENCODER:19:TV-19] set [MODE:0:NTSC 480i]
[    0.595550] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    0.595554] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    0.595557] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[    0.595560] [drm:intel_calculate_wm], FIFO watermark level: -5
[    0.595563] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[    0.595566] [drm:i9xx_update_wm], self-refresh entries: 80
[    0.595570] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 47
[    0.595573] [drm:i9xx_update_wm], memory self refresh enabled
[    0.615017] [drm:intel_update_fbc], disabled per chip default
[    0.615025] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    0.615030] [drm:intel_connector_check_state], [CONNECTOR:18:SVIDEO-1]
[    0.615034] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    0.615038] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    0.615041] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    0.615045] [drm:check_crtc_state], [CRTC:3]
[    0.615056] [drm:check_crtc_state], [CRTC:4]
[    0.649017] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[    0.649021] [drm:intel_tv_detect_type], Unrecognised TV connection
[    0.679018] [drm:intel_release_load_detect_pipe], [CONNECTOR:18:SVIDEO-1], [ENCODER:19:TV-19]
[    0.679023] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[    0.723019] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    0.723023] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    0.723026] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[    0.723030] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[    0.723033] [drm:i9xx_update_wm], memory self refresh disabled
[    0.723036] [drm:intel_update_fbc], no output, disabling
[    0.723043] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    0.723047] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    0.723051] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    0.723055] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    0.723058] [drm:check_crtc_state], [CRTC:3]
[    0.723061] [drm:check_crtc_state], [CRTC:4]
[    0.723239] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:SVIDEO-1] disconnected
[    0.723243] [drm:drm_setup_crtcs], 
[    0.723247] [drm:drm_enable_connectors], connector 5 enabled? yes
[    0.723251] [drm:drm_enable_connectors], connector 16 enabled? no
[    0.723254] [drm:drm_enable_connectors], connector 18 enabled? no
[    0.723257] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[    0.723261] [drm:drm_target_preferred], looking for preferred mode on connector 5
[    0.723264] [drm:drm_target_preferred], found mode 1024x768
[    0.723267] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
[    0.723271] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 4
[    0.723276] [drm:intelfb_create], no BIOS fb, allocating a new one
[    0.723280] [drm:i915_gem_object_create_stolen], creating stolen object: size=300000
[    0.723285] [drm:i915_pages_create_for_stolen], offset=0x20000, size=3145728
[    0.725631] [drm:intelfb_create], allocated 1024x768 fb: 0x00020000, bo f4991c00
[    0.725751] fbcon: inteldrmfb (fb0) is primary device
[    0.725805] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
[    0.725808] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    0.725811] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    0.725814] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    0.725816] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[    0.725817] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[    0.725821] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    0.725825] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    0.725827] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
[    0.725830] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    0.725832] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[    0.725835] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
[    0.725838] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[    0.725842] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[    0.725844] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
[    0.725846] [drm:intel_dump_pipe_config], cpu_transcoder: B
[    0.725847] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[    0.725850] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.725852] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.725854] [drm:intel_dump_pipe_config], requested mode:
[    0.725857] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    0.725859] [drm:intel_dump_pipe_config], adjusted mode:
[    0.725863] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    0.725866] [drm:intel_dump_crtc_timings], crtc timings: 54160 1024 1048 1184 1344 768 771 777 806, type: 0x48 flags: 0xa
[    0.725867] [drm:intel_dump_pipe_config], port clock: 54160
[    0.725869] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[    0.725871] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[    0.725873] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.725875] [drm:intel_dump_pipe_config], ips: 0
[    0.725876] [drm:intel_dump_pipe_config], double wide: 0
[    0.725879] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    0.764019] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    0.764022] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    0.764024] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[    0.764026] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[    0.764027] [drm:i9xx_update_wm], memory self refresh disabled
[    0.764032] [drm:i9xx_get_refclk], using SSC reference clock of 100000 kHz
[    0.764241] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 4096
[    0.764245] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x768]
[    0.764887] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    0.764889] [drm:intel_calculate_wm], FIFO entries required for mode: 17
[    0.764890] [drm:intel_calculate_wm], FIFO watermark level: 9
[    0.764892] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    0.764894] [drm:i9xx_update_wm], FIFO watermarks - A: 9, B: 29
[    0.764895] [drm:i9xx_update_wm], self-refresh entries: 64
[    0.764897] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 9, B: 29, C: 2, SR 63
[    0.764899] [drm:i9xx_update_wm], memory self refresh enabled
[    0.786017] [drm:intel_update_fbc], disabled per chip default
[    1.104017] [drm:intel_panel_enable_backlight], pipe B
[    1.104020] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1649105
[    1.104024] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    1.104027] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    1.104029] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    1.104031] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    1.104033] [drm:check_crtc_state], [CRTC:3]
[    1.104035] [drm:check_crtc_state], [CRTC:4]
[    1.104065] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    1.104067] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    1.104070] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.109452] Console: switching to colour frame buffer device 128x48
[    1.109458] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    1.109461] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    1.109463] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.115212] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.115583] i915 0000:00:02.0: registered panic notifier
[    1.115910] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.116525] ahci 0000:00:1f.2: version 3.0
[    1.116738] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.116779] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.117216] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[    1.117710] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    1.118971] scsi0 : ahci
[    1.119326] scsi1 : ahci
[    1.119665] scsi2 : ahci
[    1.120016] scsi3 : ahci
[    1.120267] ata1: SATA max UDMA/133 abar m1024@0xe4444400 port 0xe4444500 irq 44
[    1.120707] ata2: DUMMY
[    1.120861] ata3: DUMMY
[    1.121026] ata4: DUMMY
[    1.121284] ata_piix 0000:00:1f.1: version 2.13
[    1.122048] scsi4 : ata_piix
[    1.122381] scsi5 : ata_piix
[    1.122641] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14
[    1.125125] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15
[    1.127629] ata5: port disabled--ignoring
[    1.127701] ata6: port disabled--ignoring
[    1.127705] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.141066] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.143491] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.146020] mousedev: PS/2 mouse device common for all mice
[    1.148469] rtc_cmos 00:06: RTC can wake from S4
[    1.150974] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.153362] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.155935] device-mapper: uevent: version 1.0.3
[    1.158299] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.160930] TCP: cubic registered
[    1.163353] NET: Registered protocol family 10
[    1.165929] mip6: Mobile IPv6
[    1.168058] NET: Registered protocol family 17
[    1.170323] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.172840] Key type dns_resolver registered
[    1.175368] Using IPI No-Shortcut mode
[    1.177741] registered taskstats version 1
[    1.180479] regulator-dummy: disabling
[    1.182767] rtc_cmos 00:06: setting system clock to 2014-05-30 22:47:51 UTC (1401490071)
[    1.519025] tsc: Refined TSC clocksource calibration: 1662.499 MHz
[    1.583030] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.585602] ata1.00: ATA-7: INTEL SSDSA2M040G2GC, 2CV102M3, max UDMA/133
[    1.587994] ata1.00: 78165360 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    1.590652] ata1.00: configured for UDMA/133
[    1.593077] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2M040 2CV1 PQ: 0 ANSI: 5
[    1.595761] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.598358] sd 0:0:0:0: [sda] Write Protect is off
[    1.600668] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.600704] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.604046]  sda: sda1 sda2
[    1.606712] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.609609] Freeing unused kernel memory: 480K (c15de000 - c1656000)
[    1.612028] Write protecting the kernel text: 4116k
[    1.614448] Write protecting the kernel read-only data: 1564k
[    1.638155] udevd[85]: starting version 175
[    1.645223] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    1.645228] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    1.645232] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.681280] ACPI: bus type USB registered
[    1.683861] usbcore: registered new interface driver usbfs
[    1.686529] usbcore: registered new interface driver hub
[    1.690227] usbcore: registered new device driver usb
[    1.697818] uhci_hcd: USB Universal Host Controller Interface driver
[    1.721119] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.723749] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.726560] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000
[    1.738127] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.742333] thermal LNXTHERM:00: registered as thermal_zone0
[    1.748809] ACPI: Thermal Zone [THM0] (49 C)
[    1.753106] thermal LNXTHERM:01: registered as thermal_zone1
[    1.755497] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.755499] usb usb1: Product: UHCI Host Controller
[    1.755502] usb usb1: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    1.755504] usb usb1: SerialNumber: 0000:00:1d.0
[    1.758053] pps_core: LinuxPPS API ver. 1 registered
[    1.758055] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.758412] PTP clock support registered
[    1.759511] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.759513] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.759824] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.759868] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[    1.786054] ACPI: Thermal Zone [THM1] (43 C)
[    1.786318] hub 1-0:1.0: USB hub found
[    1.786331] hub 1-0:1.0: 2 ports detected
[    1.786704] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.786713] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    1.786767] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005020
[    1.786843] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.786846] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.786848] usb usb2: Product: UHCI Host Controller
[    1.786851] usb usb2: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    1.786853] usb usb2: SerialNumber: 0000:00:1d.1
[    1.818055] hub 2-0:1.0: USB hub found
[    1.821952] hub 2-0:1.0: 2 ports detected
[    1.827495] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.828041] sdhci: Secure Digital Host Controller Interface driver
[    1.828042] sdhci: Copyright(c) Pierre Ossman
[    1.828370] sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 18)
[    1.828383] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[    1.829506] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.829514] mmc0: no vqmmc regulator found
[    1.829515] mmc0: no vmmc regulator found
[    1.830522] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.830645] mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
[    1.855727] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    1.855732] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    1.855735] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.884470] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    1.884970] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[    1.885422] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.885829] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.887704] xor: measuring software checksum speed
[    1.898096]    pIII_sse  :  4264.000 MB/sec
[    1.908604] usb usb3: Product: UHCI Host Controller
[    1.908905] usb usb3: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    1.909297] usb usb3: SerialNumber: 0000:00:1d.2
[    1.909616]    prefetch64-sse:  4632.000 MB/sec
[    1.909894] xor: using function: prefetch64-sse (4632.000 MB/sec)
[    1.911976] hub 3-0:1.0: USB hub found
[    1.912306] firewire_ohci 0000:05:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    1.913383] hub 3-0:1.0: 2 ports detected
[    1.915465] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.915785] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    1.916298] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
[    1.921914] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.922346] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.922774] usb usb4: Product: UHCI Host Controller
[    1.923078] usb usb4: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    1.923439] usb usb4: SerialNumber: 0000:00:1d.3
[    1.927065] raid6: mmxx1     1609 MB/s
[    1.930179] hub 4-0:1.0: USB hub found
[    1.931109] hub 4-0:1.0: 2 ports detected
[    1.944051] raid6: mmxx2     1628 MB/s
[    1.961066] raid6: sse1x1    1167 MB/s
[    1.967446] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:3d:c3:60
[    1.967929] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.968443] e1000e 0000:01:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005302-003
[    1.978043] raid6: sse1x2    1531 MB/s
[    1.995025] raid6: sse2x1    1832 MB/s
[    2.012018] raid6: sse2x2    2062 MB/s
[    2.012244] raid6: using algorithm sse2x2 (2062 MB/s)
[    2.012544] raid6: using intx1 recovery algorithm
[    2.018440] bio: create slab <bio-1> at 1
[    2.019130] Btrfs loaded
[    2.019327] BTRFS: selftest: Running btrfs free space cache tests
[    2.019695] BTRFS: selftest: Running extent only tests
[    2.020038] BTRFS: selftest: Running bitmap only tests
[    2.020974] BTRFS: selftest: Running bitmap and extent tests
[    2.021351] BTRFS: selftest: Free space cache tests finished
[    2.021687] BTRFS: selftest: Running extent buffer operation tests
[    2.022059] BTRFS: selftest: Running btrfs_split_item tests
[    2.022429] BTRFS: selftest: Running find delalloc tests
[    2.168174] BTRFS: selftest: Running btrfs_get_extent tests
[    2.168623] BTRFS: selftest: Running hole first btrfs_get_extent test
[    2.216048] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    2.254447] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.364093] random: init urandom read with 89 bits of entropy available
[    2.381397] usb 3-1: New USB device found, idVendor=0951, idProduct=1665
[    2.384057] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.386610] usb 3-1: Product: DataTraveler 2.0
[    2.389014] usb 3-1: Manufacturer: Kingston
[    2.391357] usb 3-1: SerialNumber: 60A44C413F39FDB0DB490ABC
[    2.428172] firewire_core 0000:05:00.1: created device fw0: GUID 0000000000000000, S400
[    2.499049] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[    2.521105] Switched to clocksource tsc
[    2.585519] random: nonblocking pool is initialized
[    2.639526] Adding 3906556k swap on /dev/sda2.  Priority:-1 extents:1 across:3906556k SS
[    2.650709] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
[    2.663095] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.663101] usb 4-1: Product: BCM2045B
[    2.663105] usb 4-1: Manufacturer: Broadcom Corp
[    2.678893] udevd[407]: starting version 175
[    2.767294] lp: driver loaded but no devices found
[    2.768046] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[    2.805876] cfg80211: Calling CRDA to update world regulatory domain
[    2.813770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.813775] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    2.815951] ehci-pci: EHCI PCI platform driver
[    2.845254] ACPI: processor limited to max C-state 2
[    2.847127] ACPI: AC Adapter [AC] (on-line)
[    2.847263] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20131218/ac-77)
[    2.847777] Monitor-Mwait will be used to enter C-1 state
[    2.847788] tsc: Marking TSC unstable due to TSC halts in idle
[    2.847826] ACPI: acpi_idle registered with cpuidle
[    2.850936] Switched to clocksource hpet
[    2.852537] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[    2.852541] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[    2.858269] usb 3-1: USB disconnect, device number 2
[    2.908145] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    2.930745] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
[    2.930752] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.930756] usb 4-2: Product: Biometric Coprocessor
[    2.930760] usb 4-2: Manufacturer: STMicroelectronics
[    2.936029] usb 4-1: USB disconnect, device number 2
[    2.936664] usb 4-2: USB disconnect, device number 3
[    2.937408] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.937422] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    2.937446] ehci-pci 0000:00:1d.7: debug port 1
[    2.941467] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.941483] ehci-pci 0000:00:1d.7: irq 19, io mem 0xe4444000
[    2.947033] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.947108] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    2.947112] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.947117] usb usb5: Product: EHCI Host Controller
[    2.947120] usb usb5: Manufacturer: Linux 3.14.4-gnuowen ehci_hcd
[    2.947124] usb usb5: SerialNumber: 0000:00:1d.7
[    2.947668] hub 5-0:1.0: USB hub found
[    2.947683] hub 5-0:1.0: 8 ports detected
[    2.969776] ACPI: Battery Slot [BAT0] (battery absent)
[    2.969922] ACPI: Battery Slot [BAT1] (battery absent)
[    2.971176] hub 1-0:1.0: USB hub found
[    2.971193] hub 1-0:1.0: 2 ports detected
[    2.992375] hub 2-0:1.0: USB hub found
[    2.992392] hub 2-0:1.0: 2 ports detected
[    3.013193] hub 3-0:1.0: USB hub found
[    3.013210] hub 3-0:1.0: 2 ports detected
[    3.030688] yenta_cardbus 0000:05:00.0: CardBus bridge found [0000:0000]
[    3.036223] hub 4-0:1.0: USB hub found
[    3.036240] hub 4-0:1.0: 2 ports detected
[    3.036871] ACPI Warning: SystemIO range 0x00000528-0x0000052f conflicts with OpRegion 0x00000500-0x0000057f (\PMIO) (20131218/utaddress-258)
[    3.036881] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.036886] ACPI Warning: SystemIO range 0x000004b0-0x000004bf conflicts with OpRegion 0x00000480-0x000004bb (\GPIO) (20131218/utaddress-258)
[    3.036894] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.036897] ACPI Warning: SystemIO range 0x00000480-0x000004af conflicts with OpRegion 0x00000480-0x000004bb (\GPIO) (20131218/utaddress-258)
[    3.036904] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.036907] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.045039] Non-volatile memory driver v1.3
[    3.095123] usbcore: registered new interface driver usb-storage
[    3.105985] Bluetooth: Core ver 2.18
[    3.106070] NET: Registered protocol family 31
[    3.106073] Bluetooth: HCI device and connection manager initialized
[    3.106083] Bluetooth: HCI socket layer initialized
[    3.106087] Bluetooth: L2CAP socket layer initialized
[    3.106104] Bluetooth: SCO socket layer initialized
[    3.116162] ppdev: user-space parallel port driver
[    3.137226] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.137232] Bluetooth: BNEP filters: protocol multicast
[    3.137242] Bluetooth: BNEP socket layer initialized
[    3.140851] Bluetooth: RFCOMM TTY layer initialized
[    3.140865] Bluetooth: RFCOMM socket layer initialized
[    3.140874] Bluetooth: RFCOMM ver 1.11
[    3.142402] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    3.142406] thinkpad_acpi: http://ibm-acpi.sf.net/
[    3.142409] thinkpad_acpi: ThinkPad BIOS 7BETC7WW (2.08 ), EC 7BHT37WW-3.4
[    3.142412] thinkpad_acpi: Lenovo ThinkPad X60, model 1703WMF
[    3.142415] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
[    3.142417] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
[    3.162796] yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[    3.162804] yenta_cardbus 0000:05:00.0: Socket status: 30000006
[    3.162810] pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #06 to #09
[    3.162824] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io  0x2000-0x3fff]
[    3.162828] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff]
[    3.162834] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff:
[    3.162848]  excluding 0xe1ef0000-0xe20fffff
[    3.162855] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref]
[    3.162859] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff:
[    3.162894]  excluding 0xe2100000-0xe40fffff
[    3.183167] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    3.210189] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    3.214247] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[    3.252058] usb 5-5: new high-speed USB device number 2 using ehci-pci
[    3.252811] usbcore: registered new interface driver btusb
[    3.371471] usb 5-5: New USB device found, idVendor=0951, idProduct=1665
[    3.371477] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.371481] usb 5-5: Product: DataTraveler 2.0
[    3.371485] usb 5-5: Manufacturer: Kingston
[    3.371488] usb 5-5: SerialNumber: 60A44C413F39FDB0DB490ABC
[    3.373740] usb-storage 5-5:1.0: USB Mass Storage device detected
[    3.379714] init: failsafe main process (694) killed by TERM signal
[    3.400632] scsi6 : usb-storage 5-5:1.0
[    3.521058] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[    3.521066] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
[    3.521143] iwl3945 0000:02:00.0: irq 46 for MSI/MSI-X
[    3.577399] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[    3.604417] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[    3.604477] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[    3.672891] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    3.673604] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    3.673757] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    3.673879] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    3.674179] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
