[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14.4-gnuowen (sam@judas) (gcc version 4.8.2 (Debian 4.8.2-16) ) #19 SMP PREEMPT Fri May 23 08:56:34 MDT 2014
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f6cdfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f6ce000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 1703WMF/1703WMF, BIOS 7BETC7WW (2.08 ) 06/01/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3f6ce max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 0C0000000 write-back
[    0.000000]   1 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   2 base 0D0000000 mask 0F0000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] found SMP MP-table at [mem 0x000f5870-0x000f587f] mapped at [c00f5870]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x36400000-0x367fffff]
[    0.000000]  [mem 0x36400000-0x367fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x30000000-0x363fffff]
[    0.000000]  [mem 0x30000000-0x363fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x36800000-0x377fdfff]
[    0.000000]  [mem 0x36800000-0x373fffff] page 2M
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] BRK [0x017cb000, 0x017cbfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36bca000-0x375dcfff]
[    0.000000] ACPI: RSDP 000f5840 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 3f6e28e0 00004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 3f6e2a10 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 3f6e2a50 000068 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG 3f6e2ac0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 3f6e5d10 0000F4 (v03 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 3f6e2b40 0030CA (v03 COREv4 COREBOOT 20090419 INTL 20140114)
[    0.000000] ACPI: FACS 3f6e2b00 000040
[    0.000000] ACPI: SSDT 3f6e5e10 0002FC (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 126MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x017cc000, 0x017ccfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0x3f6cdfff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3f6cdfff]
[    0.000000] On node 0 totalpages: 259692
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 254 pages used for memmap
[    0.000000]   HighMem zone: 32464 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xefffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f75de000 s31360 r0 d21888 u53248
[    0.000000] pcpu-alloc: s31360 r0 d21888 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257916
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14.4-gnuowen root=UUID=0c002ce2-fe13-4dc1-9b83-6bed3c99e7a5 ro console=tty0 console=ttyS0,115200n8 processor.max_cstate=2 drm.debug=0x06
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0003f6ce)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1011276K/1038768K available (4113K kernel code, 324K rwdata, 1560K rodata, 480K init, 1448K bss, 27492K reserved, 129856K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff8e000 - 0xfffff000   ( 452 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc15de000 - 0xc1656000   ( 480 kB)
[    0.000000]       .data : 0xc14049c3 - 0xc15dd200   (1890 kB)
[    0.000000]       .text : 0xc1000000 - 0xc14049c3   (4114 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1662.588 MHz processor
[    0.002012] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.17 BogoMIPS (lpj=1662588)
[    0.004004] pid_max: default: 32768 minimum: 301
[    0.005016] ACPI: Core revision 20131218
[    0.009421] ACPI: All ACPI Tables successfully acquired
[    0.012052] Security Framework initialized
[    0.013008] SELinux:  Disabled at boot.
[    0.014021] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.015006] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.017052] Initializing cgroup subsys memory
[    0.018010] Initializing cgroup subsys devices
[    0.020005] Initializing cgroup subsys freezer
[    0.021004] Initializing cgroup subsys net_cls
[    0.022004] Initializing cgroup subsys blkio
[    0.023004] Initializing cgroup subsys perf_event
[    0.024033] Disabled fast string operations
[    0.025008] CPU: Physical Processor ID: 0
[    0.026004] CPU: Processor Core ID: 0
[    0.027005] mce: CPU supports 6 MCE banks
[    0.028013] CPU0: Thermal monitoring enabled (TM2)
[    0.029015] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.029015] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[    0.029015] tlb_flushall_shift: 6
[    0.030105] Freeing SMP alternatives memory: 12K (c1656000 - c1659000)
[    0.031078] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.032426] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.043952] smpboot: CPU0: Intel(R) Core(TM) Duo CPU      L2400  @ 1.66GHz (fam: 06, model: 0e, stepping: 0c)
[    0.048000] Performance Events: Core events, core PMU driver.
[    0.050003] ... version:                1
[    0.051002] ... bit width:              40
[    0.052002] ... generic registers:      2
[    0.053002] ... value mask:             000000ffffffffff
[    0.054002] ... max period:             000000007fffffff
[    0.055002] ... fixed-purpose events:   0
[    0.056002] ... event mask:             0000000000000003
[    0.063083] CPU 1 irqstacks, hard=f62a4000 soft=f62a6000
[    0.063087] x86: Booting SMP configuration:
[    0.064004] .... node  #0, CPUs:      #1
[    0.003000] Initializing CPU#1
[    0.003000] Disabled fast string operations
[    0.085094] x86: Booted up 1 node, 2 CPUs
[    0.086004] smpboot: Total of 2 processors activated (6650.35 BogoMIPS)
[    0.088140] devtmpfs: initialized
[    0.092433] regulator-dummy: no parameters
[    0.097084] NET: Registered protocol family 16
[    0.101209] cpuidle: using governor ladder
[    0.106003] cpuidle: using governor menu
[    0.110094] ACPI: bus type PCI registered
[    0.114053] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.123004] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.130002] PCI: Using MMCONFIG for extended config space
[    0.136002] PCI: Using configuration type 1 for base access
[    0.144024] bio: create slab <bio-0> at 0
[    0.145067] ACPI: Added _OSI(Module Device)
[    0.146003] ACPI: Added _OSI(Processor Device)
[    0.147003] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.148003] ACPI: Added _OSI(Processor Aggregator Device)
[    0.153004] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.154474] ACPI: Interpreter enabled
[    0.155014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    0.158003] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    0.161019] ACPI: (supports S0 S3 S4 S5)
[    0.162002] ACPI: Using IOAPIC for interrupt routing
[    0.163039] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.164319] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.174738] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.175010] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.176117] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.177137] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.178053] PCI host bridge to bus 0000:00
[    0.179005] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.180004] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.181004] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.182004] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.183004] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.184004] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.185004] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.186004] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.187004] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.188004] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.189004] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.190004] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.191004] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.192004] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.193004] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.194004] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.195004] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.196004] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[    0.197004] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.198015] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[    0.198174] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[    0.198190] pci 0000:00:02.0: reg 0x10: [mem 0xe4300000-0xe437ffff]
[    0.198198] pci 0000:00:02.0: reg 0x14: [io  0x50a0-0x50a7]
[    0.198208] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[    0.198216] pci 0000:00:02.0: reg 0x1c: [mem 0xe4400000-0xe443ffff]
[    0.199131] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.199144] pci 0000:00:02.1: reg 0x10: [mem 0xe4380000-0xe43fffff]
[    0.199349] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.199375] pci 0000:00:1b.0: reg 0x10: [mem 0xe4440000-0xe4443fff 64bit]
[    0.199494] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.199567] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.200079] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.200203] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.200352] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.200475] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.200622] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.201030] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.201176] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.201290] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.201436] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.201496] pci 0000:00:1d.0: reg 0x20: [io  0x5000-0x501f]
[    0.201605] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.202073] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.202132] pci 0000:00:1d.1: reg 0x20: [io  0x5020-0x503f]
[    0.202240] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.203074] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.203134] pci 0000:00:1d.2: reg 0x20: [io  0x5040-0x505f]
[    0.203241] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.204071] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.204131] pci 0000:00:1d.3: reg 0x20: [io  0x5060-0x507f]
[    0.204238] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.205086] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.205114] pci 0000:00:1d.7: reg 0x10: [mem 0xe4444000-0xe44443ff]
[    0.205227] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.205296] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.206078] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.206266] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.206387] pci 0000:00:1f.0: address space collision: [io  0x0500-0x057f] conflicts with ACPI CPU throttle [??? 0x00000510-0x00000515 flags 0x80000000]
[    0.207009] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.208006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[    0.209006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[    0.210005] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[    0.211158] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.211177] pci 0000:00:1f.1: reg 0x10: [io  0x50a8-0x50af]
[    0.211191] pci 0000:00:1f.1: reg 0x14: [io  0x50c8-0x50cb]
[    0.211206] pci 0000:00:1f.1: reg 0x18: [io  0x50b0-0x50b7]
[    0.211220] pci 0000:00:1f.1: reg 0x1c: [io  0x50cc-0x50cf]
[    0.211234] pci 0000:00:1f.1: reg 0x20: [io  0x5080-0x508f]
[    0.211381] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[    0.211407] pci 0000:00:1f.2: reg 0x10: [io  0x50b8-0x50bf]
[    0.211421] pci 0000:00:1f.2: reg 0x14: [io  0x50d0-0x50d3]
[    0.211435] pci 0000:00:1f.2: reg 0x18: [io  0x50c0-0x50c7]
[    0.211449] pci 0000:00:1f.2: reg 0x1c: [io  0x50d4-0x50d7]
[    0.211463] pci 0000:00:1f.2: reg 0x20: [io  0x5090-0x509f]
[    0.211478] pci 0000:00:1f.2: reg 0x24: [mem 0xe4444400-0xe44447ff]
[    0.212036] pci 0000:00:1f.2: PME# supported from D3hot
[    0.212170] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.212247] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.212514] pci 0000:01:00.0: [8086:109a] type 00 class 0x020000
[    0.212548] pci 0000:01:00.0: reg 0x10: [mem 0xe4100000-0xe411ffff]
[    0.212591] pci 0000:01:00.0: reg 0x18: [io  0x4000-0x401f]
[    0.212792] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.212892] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.213021] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.214007] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.214014] pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.214177] pci 0000:02:00.0: [8086:4227] type 00 class 0x028000
[    0.214237] pci 0000:02:00.0: reg 0x10: [mem 0xe4200000-0xe4200fff]
[    0.214691] pci 0000:02:00.0: PME# supported from D0 D3hot
[    0.214825] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.215030] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.216010] pci 0000:00:1c.1:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.217082] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.218100] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.219083] pci 0000:05:00.0: [1180:0476] type 02 class 0x060700
[    0.219106] pci 0000:05:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[    0.220004] pci 0000:05:00.0: MMC cards are now supported by standard SDHCI controller
[    0.221018] pci 0000:05:00.0: reg 0x10: [mem 0xe2000000-0xe2000fff]
[    0.221059] pci 0000:05:00.0: supports D1 D2
[    0.221063] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.221102] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.222080] pci 0000:05:00.1: [1180:0552] type 00 class 0x0c0010
[    0.222106] pci 0000:05:00.1: reg 0x10: [mem 0xe2001000-0xe20017ff]
[    0.223076] pci 0000:05:00.1: supports D1 D2
[    0.223080] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.223182] pci 0000:05:00.2: [1180:0822] type 00 class 0x080500
[    0.223207] pci 0000:05:00.2: reg 0x10: [mem 0xe2001800-0xe20018ff]
[    0.223313] pci 0000:05:00.2: supports D1 D2
[    0.223317] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.223470] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
[    0.224008] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.224015] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.224025] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.224029] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.224033] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.224038] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.224042] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    0.224046] pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    0.224050] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    0.224055] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
[    0.224059] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.224063] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.224067] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.224072] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.224076] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.224080] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.224084] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    0.224089] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    0.224093] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[    0.224097] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    0.224101] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.224170] pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 05-06] (conflicts with (null) [bus 05-06])
[    0.224178] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
[    0.224183] pci_bus 0000:06: busn_res: can not insert [bus 06-09] under [bus 05-06] (conflicts with (null) [bus 05-06])
[    0.224190] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-06]
[    0.225048] pci_bus 0000:00: on NUMA node 0
[    0.225169] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.230325] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.234476] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.238754] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.242477] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.246755] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.250477] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.255024] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.260301] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.261076] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.262010] vgaarb: loaded
[    0.263002] vgaarb: bridge control possible 0000:00:02.0
[    0.264140] SCSI subsystem initialized
[    0.265037] libata version 3.00 loaded.
[    0.265072] PCI: Using ACPI for IRQ routing
[    0.268618] PCI: pci_cache_line_size set to 64 bytes
[    0.268718] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.268721] e820: reserve RAM buffer [mem 0x3f6ce000-0x3fffffff]
[    0.268989] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.269008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.271257] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.274028] Switched to clocksource hpet
[    0.283550] pnp: PnP ACPI init
[    0.286711] ACPI: bus type PNP registered
[    0.290933] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.297627] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.304313] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.311011] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.317700] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.324382] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.331067] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.337755] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.344449] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.344951] pnp 00:01: [dma 4]
[    0.345000] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.345067] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.345229] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.351920] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.351993] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.352095] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.358089] system 00:05: [io  0x0500-0x057f] could not be reserved
[    0.364428] system 00:05: [io  0x0480-0x04bf] has been reserved
[    0.370417] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.370478] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.370556] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.370628] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.370676] pnp: PnP ACPI: found 9 devices
[    0.374843] ACPI: bus type PNP unregistered
[    0.417766] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.417818] pci 0000:00:1f.0: BAR 13: [io  0x0500-0x057f] has bogus alignment
[    0.425027] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.425043] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[    0.432959] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.437996] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.444162] pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.451026] pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x401fffff 64bit pref]
[    0.458858] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.463902] pci 0000:00:1c.1:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.470772] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.475825] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.480881] pci 0000:05:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.480886] pci 0000:05:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.480891] pci 0000:05:00.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.480895] pci 0000:05:00.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.480910] pci 0000:05:00.0: BAR 15: assigned [mem 0x44000000-0x47ffffff pref]
[    0.488309] pci 0000:05:00.0: BAR 16: assigned [mem 0x48000000-0x4bffffff]
[    0.495254] pci 0000:05:00.0: BAR 13: assigned [io  0x2000-0x20ff]
[    0.501511] pci 0000:05:00.0: BAR 14: assigned [io  0x2400-0x24ff]
[    0.507767] pci 0000:05:00.0: CardBus bridge to [bus 06-09]
[    0.513407] pci 0000:05:00.0:   bridge window [io  0x2000-0x20ff]
[    0.519573] pci 0000:05:00.0:   bridge window [io  0x2400-0x24ff]
[    0.525744] pci 0000:05:00.0:   bridge window [mem 0x44000000-0x47ffffff pref]
[    0.533055] pci 0000:05:00.0:   bridge window [mem 0x48000000-0x4bffffff]
[    0.539923] pci 0000:00:1e.0: PCI bridge to [bus 05-06]
[    0.545223] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.551396] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.558260] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.566093] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.566097] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.566101] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.566105] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.566109] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.566113] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.566117] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.566121] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.566125] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.566129] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.566133] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.566137] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.566141] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.566145] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.566150] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.566154] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.566158] pci_bus 0000:00: resource 20 [mem 0x40000000-0xfebfffff]
[    0.566162] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.566166] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.566170] pci_bus 0000:01: resource 1 [mem 0xe4100000-0xe41fffff]
[    0.566174] pci_bus 0000:01: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[    0.566179] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe42fffff]
[    0.566183] pci_bus 0000:05: resource 0 [io  0x2000-0x3fff]
[    0.566187] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff]
[    0.566191] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.566195] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.566199] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.566203] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.566207] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.566211] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.566215] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.566219] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff]
[    0.566223] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.566228] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.566232] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.566236] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
[    0.566240] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.566244] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.566248] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.566252] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff]
[    0.566256] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff]
[    0.566260] pci_bus 0000:05: resource 20 [mem 0x40000000-0xfebfffff]
[    0.566264] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.566268] pci_bus 0000:06: resource 0 [io  0x2000-0x20ff]
[    0.566272] pci_bus 0000:06: resource 1 [io  0x2400-0x24ff]
[    0.566276] pci_bus 0000:06: resource 2 [mem 0x44000000-0x47ffffff pref]
[    0.566280] pci_bus 0000:06: resource 3 [mem 0x48000000-0x4bffffff]
[    0.566325] NET: Registered protocol family 2
[    0.570968] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.578114] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.584674] TCP: Hash tables configured (established 8192 bind 8192)
[    0.591135] TCP: reno registered
[    0.594435] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.600435] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.606943] NET: Registered protocol family 1
[    0.611395] pci 0000:00:02.0: Boot video device
[    0.612801] PCI: CLS 64 bytes, default 64
[    0.612871] Unpacking initramfs...
[    0.962353] Freeing initrd memory: 10316K (f6bca000 - f75dd000)
[    0.969045] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.975256] audit: initializing netlink subsys (disabled)
[    0.980755] audit: type=2000 audit(1401657293.979:1): initialized
[    0.987345] bounce pool size: 64 pages
[    0.991178] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.001097] VFS: Disk quotas dquot_6.5.2
[    1.005188] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.012606] msgmni has been set to 1741
[    1.017032] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.024512] io scheduler noop registered
[    1.028517] io scheduler deadline registered
[    1.032978] io scheduler cfq registered (default)
[    1.038103] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.038406] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    1.038672] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    1.038937] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    1.039134] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.046174] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.052776] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.052808] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    1.059848] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.066451] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    1.066486] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    1.073524] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    1.073556] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    1.080597] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    1.080656] intel_idle: does not run on family 6 model 14
[    1.080782] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0E:00/input/input0
[    1.091838] ACPI: Sleep Button [SLPB]
[    1.095663] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0D:00/input/input1
[    1.106669] ACPI: Lid Switch [LID]
[    1.110247] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.117736] ACPI: Power Button [PWRF]
[    1.121758] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.128883] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.138052] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.165255] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.173736] Linux agpgart interface v0.103
[    1.177963] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    1.183648] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.192742] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.199360] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.206286] [drm] Initialized drm 1.1.0 20060810
[    1.211551] [drm:i915_dump_device_info], i915 device info: gen=3, pciid=0x27a2 flags=is_mobile,is_i945gm,has_fbc,has_hotplug,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,
[    1.211602] [drm:intel_detect_pch], No PCH found.
[    1.211607] [drm] Memory usable by graphics device = 256M
[    1.217087] [drm:i915_gem_gtt_init], GMADR size = 256M
[    1.217090] [drm:i915_gem_gtt_init], GTT stolen size = 8M
[    1.217355] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
[    1.217358] [drm:intel_opregion_setup], ACPI OpRegion not supported!
[    1.217385] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.224080] [drm] Driver supports precise vblank timestamp query.
[    1.230247] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz
[    1.230279] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[    1.230282] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[    1.230287] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[    1.230293] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[    1.230297] [drm:parse_lfp_panel_data], VBT initial LVDS value 40000300
[    1.230302] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 180 Hz, active high, min brightness 26, level 0
[    1.230306] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[    1.230312] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[    1.230315] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[    1.230319] [drm:parse_mipi], No MIPI BDB found
[    1.230329] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[    1.230338] [drm:i915_gem_init_stolen], found 8388608 bytes of stolen memory at 3f800000
[    1.230383] [drm:intel_modeset_init], 2 display pipes available.
[    1.230390] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    1.230394] [drm:intel_modeset_init], pipe A sprite A init failed: -19
[    1.230399] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    1.230402] [drm:intel_modeset_init], pipe B sprite B init failed: -19
[    1.230409] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.262030] [drm:intel_lvds_init], using preferred mode from EDID: 
[    1.262035] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    1.262041] [drm:intel_lvds_init], detected single-link lvds configuration
[    1.262120] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 4426545/4426545, sysfs interface registered
[    1.262166] [drm:intel_tv_init], Integrated TV is not present.
[    1.262173] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, ffff000]
[    1.264570] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[    1.264575] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
[    1.264700] [drm] initialized overlay support
[    1.269133] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
[    1.269143] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled
[    1.269149] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
[    1.269153] [drm:intel_modeset_readout_hw_state], [ENCODER:17:DAC-17] hw state readout: disabled, pipe A
[    1.269158] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
[    1.269162] [drm:intel_modeset_readout_hw_state], [CONNECTOR:16:VGA-1] hw state readout: disabled
[    1.269168] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[    1.269171] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    1.269174] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    1.269178] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.269182] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.269185] [drm:intel_dump_pipe_config], requested mode:
[    1.269189] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    1.269192] [drm:intel_dump_pipe_config], adjusted mode:
[    1.269197] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    1.269202] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[    1.269205] [drm:intel_dump_pipe_config], port clock: 0
[    1.269208] [drm:intel_dump_pipe_config], pipe src size: 0x0
[    1.269211] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    1.269215] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    1.269218] [drm:intel_dump_pipe_config], ips: 0
[    1.269221] [drm:intel_dump_pipe_config], double wide: 0
[    1.269225] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
[    1.269228] [drm:intel_dump_pipe_config], cpu_transcoder: B
[    1.269231] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    1.269235] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.269239] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.269242] [drm:intel_dump_pipe_config], requested mode:
[    1.269247] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0
[    1.269249] [drm:intel_dump_pipe_config], adjusted mode:
[    1.269254] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5
[    1.269259] [drm:intel_dump_crtc_timings], crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x0 flags: 0x5
[    1.269262] [drm:intel_dump_pipe_config], port clock: 65000
[    1.269266] [drm:intel_dump_pipe_config], pipe src size: 640x400
[    1.269269] [drm:intel_dump_pipe_config], gmch pfit: control: 0x80002668, ratios: 0x00000000, lvds border: 0x00000000
[    1.269273] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    1.269276] [drm:intel_dump_pipe_config], ips: 0
[    1.269279] [drm:intel_dump_pipe_config], double wide: 0
[    1.269283] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    1.269287] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    1.269291] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    1.269294] [drm:check_crtc_state], [CRTC:3]
[    1.269298] [drm:check_crtc_state], [CRTC:4]
[    1.269315] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    1.269318] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[    1.269333] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    1.269339] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    1.269345] [drm:drm_mode_debug_printmodeline], Modeline 12:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    1.269350] [drm:drm_mode_debug_printmodeline], Modeline 9:"1024x768" 40 43330 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    1.269356] [drm:drm_mode_debug_printmodeline], Modeline 10:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    1.269362] [drm:drm_mode_debug_printmodeline], Modeline 11:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    1.269365] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1]
[    1.269370] [drm:intel_crt_detect], [CONNECTOR:16:VGA-1] force=1
[    1.281017] [drm:intel_crt_detect], CRT not detected via hotplug
[    1.282016] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[    1.282020] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    1.282023] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    1.282027] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[    1.282302] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    1.282306] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[    1.282309] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[    1.282313] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1] disconnected
[    1.282316] [drm:drm_setup_crtcs], 
[    1.282320] [drm:drm_enable_connectors], connector 5 enabled? yes
[    1.282323] [drm:drm_enable_connectors], connector 16 enabled? no
[    1.282327] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[    1.282330] [drm:drm_target_preferred], looking for preferred mode on connector 5
[    1.282333] [drm:drm_target_preferred], found mode 1024x768
[    1.282336] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
[    1.282340] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 4
[    1.282344] [drm:intelfb_create], no BIOS fb, allocating a new one
[    1.282347] [drm:i915_gem_object_create_stolen], creating stolen object: size=300000
[    1.282352] [drm:i915_pages_create_for_stolen], offset=0x20000, size=3145728
[    1.283654] [drm:intelfb_create], allocated 1024x768 fb: 0x00020000, bo f4a9eb00
[    1.283740] fbcon: inteldrmfb (fb0) is primary device
[    1.285376] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
[    1.285379] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    1.285381] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.285384] [drm:intel_crtc_set_config], [CRTC:4] [FB:19] #connectors=1 (x y) (0 0)
[    1.285386] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[    1.285388] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[    1.285391] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    1.285395] [drm:drm_mode_debug_printmodeline], Modeline 18:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    1.285397] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
[    1.285400] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.285402] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[    1.285406] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
[    1.285409] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[    1.285412] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[    1.285414] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
[    1.285415] [drm:intel_dump_pipe_config], cpu_transcoder: B
[    1.285417] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[    1.285420] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.285422] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.285423] [drm:intel_dump_pipe_config], requested mode:
[    1.285427] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    1.285428] [drm:intel_dump_pipe_config], adjusted mode:
[    1.285432] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    1.285436] [drm:intel_dump_crtc_timings], crtc timings: 54160 1024 1048 1184 1344 768 771 777 806, type: 0x48 flags: 0xa
[    1.285437] [drm:intel_dump_pipe_config], port clock: 54160
[    1.285439] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[    1.285441] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[    1.285443] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    1.285444] [drm:intel_dump_pipe_config], ips: 0
[    1.285446] [drm:intel_dump_pipe_config], double wide: 0
[    1.285448] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    1.575020] [drm:i9xx_pfit_disable], disabling pfit, current: 0x80002668
[    1.575024] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    1.575027] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    1.575028] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[    1.575031] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[    1.575032] [drm:i9xx_update_wm], memory self refresh disabled
[    1.575034] [drm:intel_update_fbc], no output, disabling
[    1.575039] [drm:i9xx_get_refclk], using SSC reference clock of 100000 kHz
[    1.575249] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 4096
[    1.575253] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x768]
[    1.575896] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    1.575897] [drm:intel_calculate_wm], FIFO entries required for mode: 17
[    1.575899] [drm:intel_calculate_wm], FIFO watermark level: 9
[    1.575901] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    1.575903] [drm:i9xx_update_wm], FIFO watermarks - A: 9, B: 29
[    1.575904] [drm:i9xx_update_wm], self-refresh entries: 64
[    1.575906] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 9, B: 29, C: 2, SR 63
[    1.575908] [drm:i9xx_update_wm], memory self refresh enabled
[    1.597017] [drm:intel_update_fbc], disabled per chip default
[    1.871017] [drm:intel_panel_enable_backlight], pipe B
[    1.871019] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4426545
[    1.871024] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    1.871026] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    1.871029] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    1.871031] [drm:check_crtc_state], [CRTC:3]
[    1.871033] [drm:check_crtc_state], [CRTC:4]
[    1.871065] [drm:intel_crtc_set_config], [CRTC:4] [FB:19] #connectors=1 (x y) (0 0)
[    1.871068] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    1.871071] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.876472] [drm:intel_crtc_set_config], [CRTC:4] [FB:19] #connectors=1 (x y) (0 0)
[    1.876474] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    1.876477] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.881850] Console: switching to colour frame buffer device 128x48
[    1.881856] [drm:intel_crtc_set_config], [CRTC:4] [FB:19] #connectors=1 (x y) (0 0)
[    1.881859] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    1.881861] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.898387] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.904642] i915 0000:00:02.0: registered panic notifier
[    1.910029] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.917417] ahci 0000:00:1f.2: version 3.0
[    1.917605] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.917646] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.924366] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[    1.932727] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    1.941583] scsi0 : ahci
[    1.944348] scsi1 : ahci
[    1.947109] scsi2 : ahci
[    1.949855] scsi3 : ahci
[    1.952516] ata1: SATA max UDMA/133 abar m1024@0xe4444400 port 0xe4444500 irq 44
[    1.959998] ata2: DUMMY
[    1.962482] ata3: DUMMY
[    1.964968] ata4: DUMMY
[    1.967586] ata_piix 0000:00:1f.1: version 2.13
[    1.968350] scsi4 : ata_piix
[    1.971288] tsc: Refined TSC clocksource calibration: 1662.499 MHz
[    1.977699] scsi5 : ata_piix
[    1.982822] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14
[    1.991980] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15
[    2.001290] ata6: port disabled--ignoring
[    2.001337] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.021669] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.028844] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.036176] mousedev: PS/2 mouse device common for all mice
[    2.043936] rtc_cmos 00:06: RTC can wake from S4
[    2.050828] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.059020] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.068897] device-mapper: uevent: version 1.0.3
[    2.075708] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    2.086468] TCP: cubic registered
[    2.092129] NET: Registered protocol family 10
[    2.093636] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.109703] mip6: Mobile IPv6
[    2.114786] NET: Registered protocol family 17
[    2.121348] Key type dns_resolver registered
[    2.127976] Using IPI No-Shortcut mode
[    2.133978] registered taskstats version 1
[    2.140667] regulator-dummy: disabling
[    2.146564] rtc_cmos 00:06: setting system clock to 2014-06-01 21:14:56 UTC (1401657296)
[    2.429032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.437550] ata1.00: ATA-7: INTEL SSDSA2M040G2GC, 2CV102M3, max UDMA/133
[    2.446382] ata1.00: 78165360 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    2.455395] ata1.00: configured for UDMA/133
[    2.461950] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2M040 2CV1 PQ: 0 ANSI: 5
[    2.472406] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    2.482258] sd 0:0:0:0: [sda] Write Protect is off
[    2.489212] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.489248] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.501241]  sda: sda1 sda2
[    2.506643] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.514078] Freeing unused kernel memory: 480K (c15de000 - c1656000)
[    2.522608] Write protecting the kernel text: 4116k
[    2.529713] Write protecting the kernel read-only data: 1564k
[    2.558985] udevd[85]: starting version 175
[    2.566666] [drm:intel_crtc_set_config], [CRTC:4] [FB:19] #connectors=1 (x y) (0 0)
[    2.566672] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    2.566675] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.597255] pps_core: LinuxPPS API ver. 1 registered
[    2.611600] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.616610] PTP clock support registered
[    2.617608] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    2.617609] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    2.617961] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.618031] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[    2.630141] ACPI: bus type USB registered
[    2.630187] usbcore: registered new interface driver usbfs
[    2.630209] usbcore: registered new interface driver hub
[    2.630267] usbcore: registered new device driver usb
[    2.630615] uhci_hcd: USB Universal Host Controller Interface driver
[    2.630834] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.630842] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    2.630891] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000
[    2.630973] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    2.630975] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.630978] usb usb1: Product: UHCI Host Controller
[    2.630980] usb usb1: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    2.630982] usb usb1: SerialNumber: 0000:00:1d.0
[    2.631192] hub 1-0:1.0: USB hub found
[    2.631202] hub 1-0:1.0: 2 ports detected
[    2.631519] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.631526] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    2.631592] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005020
[    2.631670] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.631673] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.631675] usb usb2: Product: UHCI Host Controller
[    2.631677] usb usb2: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    2.631680] usb usb2: SerialNumber: 0000:00:1d.1
[    2.631860] hub 2-0:1.0: USB hub found
[    2.631870] hub 2-0:1.0: 2 ports detected
[    2.632158] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.632166] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    2.632212] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[    2.632279] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.632282] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.632284] usb usb3: Product: UHCI Host Controller
[    2.632286] usb usb3: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    2.632289] usb usb3: SerialNumber: 0000:00:1d.2
[    2.632465] hub 3-0:1.0: USB hub found
[    2.632476] hub 3-0:1.0: 2 ports detected
[    2.632748] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.632755] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    2.632799] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
[    2.632865] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.632868] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.632870] usb usb4: Product: UHCI Host Controller
[    2.632873] usb usb4: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    2.632875] usb usb4: SerialNumber: 0000:00:1d.3
[    2.633064] hub 4-0:1.0: USB hub found
[    2.633074] hub 4-0:1.0: 2 ports detected
[    2.651962] thermal LNXTHERM:00: registered as thermal_zone0
[    2.651964] ACPI: Thermal Zone [THM0] (44 C)
[    2.653082] thermal LNXTHERM:01: registered as thermal_zone1
[    2.653084] ACPI: Thermal Zone [THM1] (31 C)
[    2.713829] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:3d:c3:60
[    2.713832] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
[    2.714407] e1000e 0000:01:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005302-003
[    2.775273] sdhci: Secure Digital Host Controller Interface driver
[    2.775274] sdhci: Copyright(c) Pierre Ossman
[    2.775631] sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 18)
[    2.775652] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[    2.776811] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.776820] mmc0: no vqmmc regulator found
[    2.776821] mmc0: no vmmc regulator found
[    2.786229] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.786346] mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
[    2.849136] firewire_ohci 0000:05:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    2.937046] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[    2.989390] Switched to clocksource tsc
[    3.154633] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
[    3.154636] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.154638] usb 4-2: Product: Biometric Coprocessor
[    3.154641] usb 4-2: Manufacturer: STMicroelectronics
[    3.296262] [drm:intel_crtc_set_config], [CRTC:4] [FB:19] #connectors=1 (x y) (0 0)
[    3.296267] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    3.296270] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    3.308512] xor: measuring software checksum speed
[    3.323005]    pIII_sse  :  4296.000 MB/sec
[    3.337005]    prefetch64-sse:  4652.000 MB/sec
[    3.341584] xor: using function: prefetch64-sse (4652.000 MB/sec)
[    3.357127] firewire_core 0000:05:00.1: created device fw0: GUID 0000000000000000, S400
[    3.365021] raid6: mmxx1     1621 MB/s
[    3.382022] raid6: mmxx2     1683 MB/s
[    3.402023] raid6: sse1x1    1210 MB/s
[    3.422025] raid6: sse1x2    1593 MB/s
[    3.442028] raid6: sse2x1    1886 MB/s
[    3.462010] raid6: sse2x2    2015 MB/s
[    3.465805] raid6: using algorithm sse2x2 (2015 MB/s)
[    3.470911] raid6: using intx1 recovery algorithm
[    3.480747] bio: create slab <bio-1> at 1
[    3.485246] Btrfs loaded
[    3.487858] BTRFS: selftest: Running btrfs free space cache tests
[    3.494021] BTRFS: selftest: Running extent only tests
[    3.499241] BTRFS: selftest: Running bitmap only tests
[    3.504449] BTRFS: selftest: Running bitmap and extent tests
[    3.510183] BTRFS: selftest: Free space cache tests finished
[    3.515907] BTRFS: selftest: Running extent buffer operation tests
[    3.521978] BTRFS: selftest: Running btrfs_split_item tests
[    3.527829] BTRFS: selftest: Running find delalloc tests
[    3.679302] BTRFS: selftest: Running btrfs_get_extent tests
[    3.685082] BTRFS: selftest: Running hole first btrfs_get_extent test
[    3.739167] random: nonblocking pool is initialized
[    3.779386] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.032068] Adding 3906556k swap on /dev/sda2.  Priority:-1 extents:1 across:3906556k SS
[    4.088093] udevd[414]: starting version 175
[    4.177023] lp: driver loaded but no devices found
[    4.228585] ACPI: processor limited to max C-state 2
[    4.229061] Monitor-Mwait will be used to enter C-1 state
[    4.231923] tsc: Marking TSC unstable due to TSC halts in idle
[    4.231968] ACPI: acpi_idle registered with cpuidle
[    4.233759] Switched to clocksource hpet
[    4.285026] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    4.301343] ACPI: AC Adapter [AC] (on-line)
[    4.301497] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20131218/ac-77)
[    4.308674] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.308680] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    4.309684] cfg80211: Calling CRDA to update world regulatory domain
[    4.311934] ACPI Warning: SystemIO range 0x00000528-0x0000052f conflicts with OpRegion 0x00000500-0x0000057f (\PMIO) (20131218/utaddress-258)
[    4.311946] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.311951] ACPI Warning: SystemIO range 0x000004b0-0x000004bf conflicts with OpRegion 0x00000480-0x000004bb (\GPIO) (20131218/utaddress-258)
[    4.311959] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.311962] ACPI Warning: SystemIO range 0x00000480-0x000004af conflicts with OpRegion 0x00000480-0x000004bb (\GPIO) (20131218/utaddress-258)
[    4.311969] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.311972] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.314692] ehci-pci: EHCI PCI platform driver
[    4.320993] yenta_cardbus 0000:05:00.0: CardBus bridge found [0000:0000]
[    4.383347] usb 4-2: USB disconnect, device number 2
[    4.383809] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    4.383824] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    4.383887] ehci-pci 0000:00:1d.7: debug port 1
[    4.389610] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    4.389626] ehci-pci 0000:00:1d.7: irq 19, io mem 0xe4444000
[    4.404831] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.404936] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    4.404941] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.404945] usb usb5: Product: EHCI Host Controller
[    4.404948] usb usb5: Manufacturer: Linux 3.14.4-gnuowen ehci_hcd
[    4.404952] usb usb5: SerialNumber: 0000:00:1d.7
[    4.405465] hub 5-0:1.0: USB hub found
[    4.405626] hub 5-0:1.0: 8 ports detected
[    4.422640] ACPI: Battery Slot [BAT0] (battery absent)
[    4.422755] ACPI: Battery Slot [BAT1] (battery absent)
[    4.423078] Non-volatile memory driver v1.3
[    4.427905] hub 1-0:1.0: USB hub found
[    4.427923] hub 1-0:1.0: 2 ports detected
[    4.439372] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    4.439378] thinkpad_acpi: http://ibm-acpi.sf.net/
[    4.439380] thinkpad_acpi: ThinkPad BIOS 7BETC7WW (2.08 ), EC 7BHT37WW-3.4
[    4.439383] thinkpad_acpi: Lenovo ThinkPad X60, model 1703WMF
[    4.439386] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
[    4.439388] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
[    4.448959] yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0ca8, PCI irq 16
[    4.448967] yenta_cardbus 0000:05:00.0: Socket status: 30000006
[    4.448973] pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #06 to #09
[    4.448985] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io  0x2000-0x3fff]
[    4.448990] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff]
[    4.448995] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff:
[    4.449048]  excluding 0xe1ef0000-0xe20fffff
[    4.449055] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref]
[    4.449060] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff:
[    4.449095]  excluding 0xe2100000-0xe40fffff
[    4.449303] hub 2-0:1.0: USB hub found
[    4.449318] hub 2-0:1.0: 2 ports detected
[    4.449882] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    4.471038] hub 3-0:1.0: USB hub found
[    4.471057] hub 3-0:1.0: 2 ports detected
[    4.471483] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    4.493130] hub 4-0:1.0: USB hub found
[    4.493147] hub 4-0:1.0: 2 ports detected
[    4.493741] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[    4.493745] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[    4.507136] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[    4.524409] ppdev: user-space parallel port driver
[    4.531907] parport0: PC-style at 0x3bc (0x7bc)
[    4.556165] Bluetooth: Core ver 2.18
[    4.556230] NET: Registered protocol family 31
[    4.556234] Bluetooth: HCI device and connection manager initialized
[    4.556244] Bluetooth: HCI socket layer initialized
[    4.556249] Bluetooth: L2CAP socket layer initialized
[    4.556265] Bluetooth: SCO socket layer initialized
[    4.583187] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.583193] Bluetooth: BNEP filters: protocol multicast
[    4.583203] Bluetooth: BNEP socket layer initialized
[    4.584672] Bluetooth: RFCOMM TTY layer initialized
[    4.584682] Bluetooth: RFCOMM socket layer initialized
[    4.584690] Bluetooth: RFCOMM ver 1.11
[    4.653192]  [PCSPP,TRISTATE]
[    4.653202] parport0: irq 7 detected
[    4.708942] usb 5-5: new high-speed USB device number 2 using ehci-pci
[    4.759491] lp0: using parport0 (polling).
[    4.759497] lp0: console ready
[    4.771475] init: failsafe main process (681) killed by TERM signal
[    4.825911] usb 5-5: New USB device found, idVendor=0951, idProduct=1665
[    4.825919] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.825923] usb 5-5: Product: DataTraveler 2.0
[    4.825927] usb 5-5: Manufacturer: Kingston
[    4.825931] usb 5-5: SerialNumber: 60A44C413F39FDB0DB490ABC
[    4.890579] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    4.928052] usb 5-6: new high-speed USB device number 3 using ehci-pci
[    5.019316] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[    5.042556] usb 5-6: New USB device found, idVendor=17ef, idProduct=1000
[    5.042563] usb 5-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.076287] hub 5-6:1.0: USB hub found
[    5.076427] hub 5-6:1.0: 4 ports detected
[    5.120125] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[    5.120639] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[    5.136681] cfg80211: World regulatory domain updated:
[    5.136686] cfg80211:  DFS Master region: unset
[    5.136686] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    5.136688] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.136690] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    5.136692] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    5.136694] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.136696] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
